03-27-2016, 12:15 PM
The photo was taken in Schleswig, Nydam Hall.
Here you have everything.
![[Image: 12920237_1147905865240111_15695058057587...e=5775817F]](https://scontent-fra3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/12920237_1147905865240111_1569505805758774612_n.jpg?oh=c2c3d516224dfe4384513ceba5065ed7&oe=5775817F)
As for the width I finally figured out correct numbers in the most simple way
I took photo from Miks' book with cross-section under the blade. Knowing that cross section is 57,5mm I zoomed it so it's 57,5mm on my screen.
Then I measured width near the tip and at the broken place. Respectivly 37mm and 42mm.
But how to find out is these numbers are correct? I know that broken part is 265mm so I measured this part in the same zoom and it was 26-27cm so seems like everything fits.
![[Image: 12512428_1147908575239840_65110908072003...e=578021BD]](https://scontent-fra3-1.xx.fbcdn.net/hphotos-xfl1/v/t1.0-9/12512428_1147908575239840_6511090807200397235_n.jpg?oh=39d434bafb8f2d81e414de2219557547&oe=578021BD)
Here you have everything.
As for the width I finally figured out correct numbers in the most simple way
I took photo from Miks' book with cross-section under the blade. Knowing that cross section is 57,5mm I zoomed it so it's 57,5mm on my screen.
Then I measured width near the tip and at the broken place. Respectivly 37mm and 42mm.
But how to find out is these numbers are correct? I know that broken part is 265mm so I measured this part in the same zoom and it was 26-27cm so seems like everything fits.
Damian
