Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turned Aspis Project in Progress
#16
More. FYI, the chuck was glued and screwed to the blank. This was the biggest piece Ed had ever turned. We rebalanced twice at the beginning because the wobble was dangerous. We finally figured out that two of the planks near the center were denser than the rest of the boards. That threw off the spin slightly. The piece always came to rest in the same position.
Cheryl Boeckmann
Reply


Messages In This Thread
Re: Turned Aspis Project in Progress - by Chris B - 05-27-2008, 08:45 PM
Re: Turned Aspis Project in Progress - by Athena Areias - 05-28-2008, 01:47 PM
Re: Turned Aspis Project in Progress - by Kineas - 06-02-2008, 01:41 PM
Re: Turned Aspis Project in Progress - by Kineas - 06-16-2008, 01:40 PM
turned aspis - by The Spinner - 06-17-2008, 12:21 PM
print - by The Spinner - 06-17-2008, 09:27 PM
Turned Aspis project - by Paullus Scipio - 06-18-2008, 01:58 AM
Re: Turned Aspis Project in Progress - by Magnus - 03-12-2009, 02:27 AM
RE: Turned Aspis Project in Progress - by Feinman - 08-14-2017, 11:37 AM

Forum Jump: