Aquila - Printable Version +- RomanArmyTalk (https://www.romanarmytalk.com/rat) +-- Forum: Reenactment (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=5) +--- Forum: Roman Re-Enactment & Reconstruction (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=26) +--- Thread: Aquila (/showthread.php?tid=11012) |
Aquila - jvrjenivs - 11-19-2007 Last weekend Gerard (tiberivs) worked on our new aquila. Here the first pic of Gerard proudly holding the aquila, attached to his way to long standard. More pics will follow soon. Re: Aquila - Gaius Julius Caesar - 11-19-2007 I don't know, is it too long? maybe eagle is a tad on the wee side. :? #But looks good none the less! 8) Re: Aquila - tiberivs - 11-19-2007 next time i will dress roman style for the photo Re: Aquila - tiberivs - 11-19-2007 Quote:I don't know, is it too long? maybe eagle is a tad on the wee side. :? #But looks good none the less! 8) we didn't cut the pole because we want to measure the proper height. we also wait for the bottom piece. Re: Aquila - Virilis - 11-19-2007 Looks good ! Where did you get the eagle? Re: Aquila - jvrjenivs - 11-19-2007 Quote:Looks good ! Where did you get the eagle? stores.ebay.de/MessingShop-orte Re: Aquila - Gaius Julius Caesar - 11-19-2007 hmmm had a bug problem, but will try this again? thought the height was about right for a 'here is the Eagle' look, and nobody can miss it! :wink: What are the bottom bits you are refering to? Lookiing good anyway! Re: Aquila - Virilis - 11-19-2007 Nice, not expensive 8) ! Re: Aquila - jvrjenivs - 11-19-2007 Byron, note that the pole is standing on the ground on this picture. So if you would carry it on the battlefield, the eagle is about 1 meter higher in the air. Bottom piece we're waiting for is a buttspike. Sure it was cheap. Only the brass needed for this eagle is more expensive than this piece here in the Netherlands. Re: Aquila - Gaius Julius Caesar - 11-19-2007 Ok, maybe a little long then :wink: Re: Aquila - Robert - 11-19-2007 Jurjen, I can hammer you a iron buttspike from solid wall tube in less then half an hour when I fire the forge, but then again, its iron and perhaps you want brass? Re: Aquila - FAVENTIANVS - 11-20-2007 Great avatar Virilis!!! Re: Aquila - Magnus - 11-20-2007 Quote:Great avatar Virilis!!! Jyrki with things in his mouth that he blows is nothing new...bahahahaha! Re: Aquila - QVINTVS ARTORIVS CORVINVS - 11-20-2007 Damn you Magnus... now I have to wipe the coffee I sprayed onto my monitor :evil: <composure regained> hock: </composure regained> Speaking of Aquilla... have you gents ever seen this place? http://stores.ebay.com/FLAGPOLES-ETC_W0 ... QpZ3QQtZkm They sell some pretty decent stuff in bronze, brass or steel... also have a range of sizes from 15" to 27" tall. Take a look and tell me what you think, as I am considering getting one for my group Legio XXI Rapax. Phillip Re: Aquila - Gaius Julius Caesar - 11-20-2007 Is that the wing span? hmmmm nice attention seeking sizes...... |