+- RomanArmyTalk (https://www.romanarmytalk.com/rat)
+-- Forum: Reenactment (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=5)
+--- Forum: Roman Re-Enactment & Reconstruction (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=26)
+--- Thread: Patera vendor/Help (/showthread.php?tid=16691)
Patera vendor/Help - Doc - 04-04-2010
Does anyone have a source for good quality and accurate pateras.
The following criteria is what I would like:
1) Bronze NOT brass
2) Made from one piece not two welded together to look like one piece
3) Plain with no decoration on the handle since I would like to add it myself
4) Tinned on the interior
Now, If criteria 3 and 4 cannot be obtained, no problem so long the 1 and 2 are spot on. I can deal with a pre-decorated patera provided that the decoration has evidence for it not invernted or made up. The tinning I can have done.
Thanks in advance for any help
Re: Patera vendor/Help - Gaius Julius Caesar - 04-04-2010
Eric Konig.
Re: Patera vendor/Help - caiusbeerquitius - 04-04-2010
Yup.
Re: Patera vendor/Help - Doc - 04-04-2010
Thanks for the reply.
I have been on his site several times but did not look for that type of stuff.