Covering rivet bottoms on inside of Scutum. - Printable Version +- RomanArmyTalk (https://www.romanarmytalk.com/rat) +-- Forum: Reenactment (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=5) +--- Forum: Roman Re-Enactment & Reconstruction (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=26) +--- Thread: Covering rivet bottoms on inside of Scutum. (/showthread.php?tid=27232) |
Covering rivet bottoms on inside of Scutum. - 66kbm - 05-27-2016 Hi all, After some advice before I leap into the unknown please. I intend to cover all rivet bottoms with either paper masking tape or cut pieces of Linen to tidy up the inside of the Scutum I am looking for advice as to what is best, and if linen, the best glue to use. The paint is Coo-var red oxide metal primer. We use many rivets in our groups Scututa....see pic. Any advice is greatly appreciated. Kevin RE: Covering rivet bottoms on inside of Scutum. - brennivs - tony drake - 05-27-2016 Kevin use linen and I would use copydex but since you have painted it not sure if it would stick, have you covered the shield with any material before panting? Otherwise it looks great Regards Brennivs RE: Covering rivet bottoms on inside of Scutum. - 66kbm - 05-27-2016 Standard DSC Scutum, Cearleon type, with only the pre said paint upon it I would prefer a thick Linen over the "butts" so to speak, as I know paper at some time will break. Still need the best glue to use please. Kevin Not my Scuta, but member of groups. Shown for example of rivets used. RE: Covering rivet bottoms on inside of Scutum. - brennivs - tony drake - 05-27-2016 Well go with a epoxy resin key the area around rivet put a bit on linen and area around rivet once dry a quick key over linen then paint. Use maybe surgical gloves to help push the linen down onto the shield. Regards Brennivs RE: Covering rivet bottoms on inside of Scutum. - 66kbm - 05-27-2016 Many thanks, I will try that Did not think PVA was up for the job. Kevin |