11-28-2006, 05:00 PM
After doing some research, and asking many questions of very patient members of the board (thanks)
I finally produced my first late Roman belt. The leather is 8oz veg tan leather that has been stained with walnut hull dye that I made myself, and edged with green milk paint that I purchased from Milkpaint.com. I sealed the leather with all natural beeswax to prevent any water spotting, and to give the leather some shine.
The stitching was done with 100% cotton thread since I could not find linen in the color I wanted. I do not know if this was ever done on original late Roman belts. However I have seen numerous imperial Roman leather pieces with decorative stitching holes.
The buckle, and the belt tip were purchased from Raymonds Quiet Press.
I changed the buckle from Raymonds design. I removed the intergral rivets that are common on Raymonds products, and drilled holes for small copper rivets. I also removed the bowtie piece from the buckle since I could not find any originals with this.
I made the stiffeners from some brass stock I purchased at the local hobby store. I done some simple stamping to give them some decoration, and to give them character.
Please ignore the tunic I am wearing in the photos. It was my first attempt at a 4th century tunic, and I came up a little short on it. :wink:
Overall I am relatively happy with this belt. The next one I make will be done with a more correct buckle, and possibly more decorative stitching.
![[Image: P1010659.jpg]](http://i131.photobucket.com/albums/p309/Doktor_Zaius/P1010659.jpg)
![[Image: P1010661.jpg]](http://i131.photobucket.com/albums/p309/Doktor_Zaius/P1010661.jpg)
I finally produced my first late Roman belt. The leather is 8oz veg tan leather that has been stained with walnut hull dye that I made myself, and edged with green milk paint that I purchased from Milkpaint.com. I sealed the leather with all natural beeswax to prevent any water spotting, and to give the leather some shine.
The stitching was done with 100% cotton thread since I could not find linen in the color I wanted. I do not know if this was ever done on original late Roman belts. However I have seen numerous imperial Roman leather pieces with decorative stitching holes.
The buckle, and the belt tip were purchased from Raymonds Quiet Press.
I changed the buckle from Raymonds design. I removed the intergral rivets that are common on Raymonds products, and drilled holes for small copper rivets. I also removed the bowtie piece from the buckle since I could not find any originals with this.
I made the stiffeners from some brass stock I purchased at the local hobby store. I done some simple stamping to give them some decoration, and to give them character.
Please ignore the tunic I am wearing in the photos. It was my first attempt at a 4th century tunic, and I came up a little short on it. :wink:
Overall I am relatively happy with this belt. The next one I make will be done with a more correct buckle, and possibly more decorative stitching.
![[Image: P1010659.jpg]](http://i131.photobucket.com/albums/p309/Doktor_Zaius/P1010659.jpg)
![[Image: P1010661.jpg]](http://i131.photobucket.com/albums/p309/Doktor_Zaius/P1010661.jpg)
![[Image: P1010662.jpg]](http://i131.photobucket.com/albums/p309/Doktor_Zaius/P1010662.jpg)
"...quemadmodum gladius neminem occidit, occidentis telum est."
a.k.a. Paul M.
a.k.a. Paul M.