03-06-2015, 12:16 AM
Now you told me it´s clear in the pictures. But you surely noticed how difficult is to do so many bevels in so small width. That´s why I did mine on the thicker side of the historical record: around 8 mm in the forte. To make room for a bigger angle and keep ridges notorious. I always wanted to know how defined are these blades near the point where the thickness is much reduced. Mine was about 4 mm, but entirely hypotetical.
It seems that the octagonal blade is the one that goes with this handle. Even not studed, there are very similar hilts with them
It seems that the octagonal blade is the one that goes with this handle. Even not studed, there are very similar hilts with them