04-20-2018, 09:46 PM
But it is understood that most of the plates have a different relief of concentric circles. I took up the task to reconstruct one of them. The matrix I have constructed is complex and very detailed. The matrix is designed to cut and press a 0.5mm thick metal sheet (brass or silver). From this picture (which shows the back of the details) is quite visible that all the plates are hammered. The photos show details of 2 types of metal one is brass the other is silver.Ears that are curved at both ends of the plates are several models in this belt. I show here the brass models so it can be more clearly the differences in technology manufacturing. I use brass sheet thin 0.5 mm.
The size of the plates (the originals) are different. I produce plates with a size length between 43 or 44 mm. and height 40 or 41 mm. (this does not include mounted balls on the axle).
1st-plate model I produce is the one without the snakescent tape on the tube. 50% of the plates for this belt kit are without a snake-like band on the tube. Axes and decorative balls are mounted separately as archeology.The plates are very light-21 g.
The size of the plates (the originals) are different. I produce plates with a size length between 43 or 44 mm. and height 40 or 41 mm. (this does not include mounted balls on the axle).
1st-plate model I produce is the one without the snakescent tape on the tube. 50% of the plates for this belt kit are without a snake-like band on the tube. Axes and decorative balls are mounted separately as archeology.The plates are very light-21 g.