03-07-2018, 01:35 AM
Hello all...
It has been awhile. Over the pass 6 months I have faced a huge family crisis. During this time, most of the activities have been shut down in my shop. I have also revamped the shop, upgraded and re-tooled it.
In the next few weeks I will be able to make and create both Lost Wax and Sand castings in Brass, Bronze, Silver and Gold. I upgraded things in order to keep as much of what I do "In House" and the only suppliers I will need are for raw materials.
I have recently made the models and molds for 3 different types of Scabbard Suspension rings for the Scabbards I make.
One of my goals i to create things that are needed/desired that are not necessarily available currently, or they are available but not "Accurate."
If you have needs or can suggest things that are needed, let me know. Once I have a working model and / or mold, I can make pieces available at a broader range.
This can range from Sword and scabbard parts, to fibulas, buckles, rings, pins, belt frogs, plates, and the many different "Danglies" Balteus, Cingulum and Baldric Hardware.
Some of these pieces will include enamelings. I am set up to do most things that are 7" x 7" or smaller.
I will also be endeavoring to create stamped pieces, I currently have some of the tools, but in order to make the dies, there would have to be a bigger demand for finished pieces.
So, there is where I am at. I should have everything in place in the next few weeks. Your suggestions or needs are welcome for things that you think are worthy of developing.
In His Service and Yours,
--Patrick
It has been awhile. Over the pass 6 months I have faced a huge family crisis. During this time, most of the activities have been shut down in my shop. I have also revamped the shop, upgraded and re-tooled it.
In the next few weeks I will be able to make and create both Lost Wax and Sand castings in Brass, Bronze, Silver and Gold. I upgraded things in order to keep as much of what I do "In House" and the only suppliers I will need are for raw materials.
I have recently made the models and molds for 3 different types of Scabbard Suspension rings for the Scabbards I make.
One of my goals i to create things that are needed/desired that are not necessarily available currently, or they are available but not "Accurate."
If you have needs or can suggest things that are needed, let me know. Once I have a working model and / or mold, I can make pieces available at a broader range.
This can range from Sword and scabbard parts, to fibulas, buckles, rings, pins, belt frogs, plates, and the many different "Danglies" Balteus, Cingulum and Baldric Hardware.
Some of these pieces will include enamelings. I am set up to do most things that are 7" x 7" or smaller.
I will also be endeavoring to create stamped pieces, I currently have some of the tools, but in order to make the dies, there would have to be a bigger demand for finished pieces.
So, there is where I am at. I should have everything in place in the next few weeks. Your suggestions or needs are welcome for things that you think are worthy of developing.
In His Service and Yours,
--Patrick
