Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
I find the drill bits I'm using to drill 18 ga. plate tend to dull somewhat quickly. I don't mind spending cash on good tools...what kind of a bit (1/8") should I look for? A particular brand or type...?
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 1,962
Threads: 106
Joined: Apr 2003
Reputation:
7
When you drill steel, simply put a drop of machine oil (or any oil) in the head of the bit. In this manner, the head do'nt get a high temperature and do'nt lost his hardness.
If you make the holes in plates for making a segmentata or so, why do'nt try to use a good heavy duty punch pliers? It woorks fine and it's very easy, quick and silent.
8)
Posts: 479
Threads: 65
Joined: Feb 2006
Reputation:
0
It depends, if you’re using a drill press then a carbide bit will last longer, if you drill by hand, you take the chance of the bit grabbing the edge as it punches through. If this happens the tip bit can break or it can cut into the metal.
If you drill by hand then high speed steel should be good enough.
Steve
Posts: 2,045
Threads: 116
Joined: Apr 2003
Reputation:
0
I use HSS (high-speed steel) bits generally. Friction heat doesn't affect the temper and hardness of these so easily and thus they are best for high-friction work like cutting metal. Definitely oil will help too. You should be sure the bit you choose is suitable for metal (usually marked on the packaging) and not just wood or plastic. You might be pressing a bit hard too- trying to get the bit to cut too quickly- and that will hasten dulling. Remember the bit is actually CARVING the steel. If you're pushing hard as you might if you were drilling wood, reduce the pressure some and try to make the hole a little more slowly.
See FABRICA ROMANORVM Recreations in the Marketplace for custom helmets, armour, swords and more!
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
Cool, thanks guys!
I can't use a punch because I'm making holes in a solid, riveted cuirass...the punch wouldn't reach past the first set of wholes.
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 4,887
Threads: 163
Joined: Aug 2002
Reputation:
0
I find it useful to drill a smaller 'pilot' hole first. Then enlarge to the required diameter. And, as matt says, keep the drill speed slow and let the drill do the work.
Posts: 1,337
Threads: 175
Joined: Apr 2005
Reputation:
0
You will never want to use a drill again if you get this........
http://www.harborfreight.com/cpi/ctaf/D ... mber=44060
"...quemadmodum gladius neminem occidit, occidentis telum est."
a.k.a. Paul M.
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
Yeah, my friend has a whitney punch. It'd be perfect if I could pre-punch the holes for the plates, but I found out the hard way I can't.
Here's the project:
http://www.geocities.com/thearmourroom/ ... hmycat.jpg
I'm just working on the back plates now. But because they're being bent in two directions...side to side and slightly top to bottom, it shifts the holes. And since the plates are rivetted right together, there's no way to get a whitney punch to any of the inner holes.
So I'm stuck hand drilling them...I'm going to try a combination of the oil and a good metal high speed bit.
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 2,045
Threads: 116
Joined: Apr 2003
Reputation:
0
Quote:You will never want to use a drill again if you get this........
http://www.harborfreight.com/cpi/ctaf/D ... mber=44060
I actually stopped using mine- the holes are a touch smaller than a commercial 1/8" rivet (at least the kind I could get), so I ended-up having to enlarge the holes a little with a drill anyway.
See FABRICA ROMANORVM Recreations in the Marketplace for custom helmets, armour, swords and more!
Posts: 1,587
Threads: 75
Joined: Jul 2001
Reputation:
0
I picked up some titanium bits, use light machine oil and go slow.
Just don't use them on wood........
Caius Fabius Maior
Charles Foxtrot
moderator, Roman Army Talk
link to the rules for posting
[url:2zv11pbx]http://romanarmy.com/rat/viewtopic.php?t=22853[/url]
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
Would a general purpose lubricant work as an oil?
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 2,045
Threads: 116
Joined: Apr 2003
Reputation:
0
I don't see why not- it's main purpose is to transfer heat. I don't use anything at all and have no dulling problems myself...
See FABRICA ROMANORVM Recreations in the Marketplace for custom helmets, armour, swords and more!
Posts: 3,458
Threads: 839
Joined: Feb 2001
Reputation:
19
My first attempt at drilling was a nightmare, but it turned out that the chuck was worn and was wobbling the bit, so that it never actually bit into the metal. When I figured that out and bought a new drill, it was like butter. The 18volt handheld Black and Decker I have now has a quick release chuck, and I think it's beginning to wobble the bit.
Also, did you use a nail set/punch to put a depression in the metal for the bit to start in? That makes life a lot easier.
Richard Campbell
Legio XX - Alexandria, Virginia
RAT member #6?
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
Yeah, I pre-punch all my holes. I tried one of my other bits, it seems to be working well now.
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 2,045
Threads: 116
Joined: Apr 2003
Reputation:
0
Cool
See FABRICA ROMANORVM Recreations in the Marketplace for custom helmets, armour, swords and more!
|