08-19-2010, 08:15 PM
I have been experimenting with a two part mould D
I placed a thin piece of plastic bag between the two halfs pushed together then held in place by 4 rods.
When the clay dryed I drilled a filling hole through the two pieces. I placed the shaft of the Plumbata in the mould the sealed around the imprestion with clay.
I then placed the other half and tightend in the vice.
Then slowly poured lead in
Regards Brennivs
I placed a thin piece of plastic bag between the two halfs pushed together then held in place by 4 rods.
When the clay dryed I drilled a filling hole through the two pieces. I placed the shaft of the Plumbata in the mould the sealed around the imprestion with clay.
I then placed the other half and tightend in the vice.
Then slowly poured lead in
Regards Brennivs
Woe Ye The Vanquished
Brennvs 390 BC
When you have all this why do you envy our mud huts
Caratacvs
Centvrio Princeps Brennivs COH I Dacorivm (Roma Antiqvia)
Brennvs 390 BC
When you have all this why do you envy our mud huts
Caratacvs
Centvrio Princeps Brennivs COH I Dacorivm (Roma Antiqvia)