02-10-2009, 10:18 PM
So just gring the edges of the blade 7mm inward, then grind down from the center line all the way to the edge until you have a smooth slant, then bring the edge to 1mm thick. After all this polish the blade up and it is done. Correct?
I guess I do have one more question (sorry), how far in should I bring the 1mm edge into the blade? And would I still use a grinder on this, or something more delicate so I dont grind away unevenly or too much material?
Thanks for the drawings, hopefully I get this now. Let me know is this is all right.
-Nihonivs :mrgreen:
I guess I do have one more question (sorry), how far in should I bring the 1mm edge into the blade? And would I still use a grinder on this, or something more delicate so I dont grind away unevenly or too much material?
Thanks for the drawings, hopefully I get this now. Let me know is this is all right.
-Nihonivs :mrgreen:
Nomen:Jared AKA "Nihon" AKA "Nihonius" AKA "Hey You"
Now with Anti-Varus protection! If your legion is lost for any reason, we will give it back! Guaranteed!
Carpe Dium
Now with Anti-Varus protection! If your legion is lost for any reason, we will give it back! Guaranteed!
Carpe Dium