11-25-2011, 10:43 PM
The new wax Capricorn with а hole(тhe hole is required for the pole of the signum) on which my and my brother was worked (on a private order ).There are over 300 flakes scale to make 
.Wax model is completed ! I have done all technical work on a my brother Jordan creative project. It was very difficult to work with this wax Capricorn! The wax is get warms and softens constantly! So I have to working in a cold room. The wax is getting warm for 15 minutes from the warmth of my hand. I have to keep it in the refrigerator for 30 minutes then. However .To be made I was used 5 types of wax!
![[Image: 7ce18f282072.jpg]](http://s017.radikal.ru/i438/1111/3f/7ce18f282072.jpg)
.Wax model is completed ! I have done all technical work on a my brother Jordan creative project. It was very difficult to work with this wax Capricorn! The wax is get warms and softens constantly! So I have to working in a cold room. The wax is getting warm for 15 minutes from the warmth of my hand. I have to keep it in the refrigerator for 30 minutes then. However .To be made I was used 5 types of wax!
