11-13-2012, 09:30 PM
Here are pictures of the scales I produce cut with holes included all in one punch along with the linking strip (they are of course six hole type without side holes) that is cut from the top end of each scale.
The scales are 2cm x 3cm in size and the strip is cut from both directions across the 2cm width with the top blade of the punch, then as earlier mentioned the strips are bent over in the form of paper clips with snipe nose pliers to link the scales together.
[attachment=5785]romanMedium.jpg[/attachment]
[attachment=5786]roman006Medium.jpg[/attachment]
[attachment=5787]roman007Medium.jpg[/attachment]
The scales are 2cm x 3cm in size and the strip is cut from both directions across the 2cm width with the top blade of the punch, then as earlier mentioned the strips are bent over in the form of paper clips with snipe nose pliers to link the scales together.
[attachment=5785]romanMedium.jpg[/attachment]
[attachment=5786]roman006Medium.jpg[/attachment]
[attachment=5787]roman007Medium.jpg[/attachment]
Brian Stobbs