05-03-2004, 05:53 PM
Ave,<br>
<br>
I am messing around with a signum project, and I wonder what<br>
diameter the Phalarae should be. I'm guessing about 6-7 inches, but<br>
I know some of you have actually made signum and may have a<br>
suggestion. Also, would you suggest a bolt through arrangement, or<br>
rings for the staff to pass through (I guess with a set nail), and<br>
should there be some sort of stand-off to raise the disks away from<br>
the staff. I haven't really got around to planning the hand or<br>
inverted bowl with tassels (real technical name), or COH placard.<br>
Any ideas, suggestions, or closeup photos would be very helpful. e-<br>
mail me directly or post here.<br>
<br>
Vale. Quintus Florentius<br>
<p></p><i></i>
<br>
I am messing around with a signum project, and I wonder what<br>
diameter the Phalarae should be. I'm guessing about 6-7 inches, but<br>
I know some of you have actually made signum and may have a<br>
suggestion. Also, would you suggest a bolt through arrangement, or<br>
rings for the staff to pass through (I guess with a set nail), and<br>
should there be some sort of stand-off to raise the disks away from<br>
the staff. I haven't really got around to planning the hand or<br>
inverted bowl with tassels (real technical name), or COH placard.<br>
Any ideas, suggestions, or closeup photos would be very helpful. e-<br>
mail me directly or post here.<br>
<br>
Vale. Quintus Florentius<br>
<p></p><i></i>