05-17-2007, 01:53 PM
Quote:I removed the brass from a Deepeeka Gallic H simply by heating it with a propane torch. It was only attached at the joints by brazing. I then had to cut that with a dremel. Once I had reshaped the skirt it was difficult in learning how to anneal and shape the brass back to the piece. However I am confident you can do it. It just requires patience something I am short on.Thanks Paul! Anyway my original idea was to take away the brass edgings completely! I think the new improved Deepeeka Niederbieber helmet don`t have those edgings at all. My only worry is that due to the thinnes of material the edges of the cut outs would be too sharp ...