Posts: 132
Threads: 5
Joined: Jun 2007
Reputation:
0
Salvete
I have a problem. I recently got the Find-It ferrata hamata and i can not push the button shafts trough the double layer of rings. Has anybody here this hamata with the find-it buttons? It apparently seems that the shafts are either short or too big...
Thank you and best regards
Israel M. Sánchez
Mulae Marii- Legio VIIII Hispana
Posts: 132
Threads: 5
Joined: Jun 2007
Reputation:
0
The buttons from the Find-It hamata have a screwed shaft that is purported to go trough the rings; the lower buttons secure the doublings, whereas the other two are utilized for the hooks. So, the former two buttons must go trough a double layer of rings, the layer of the doubling and the layer of the hamata shirt. These two are the ones that i am not able to put in place.
Good system that showed in the pic. Maybe i will try to replicate it.
Regards
Israel
Israel M. Sánchez
Mulae Marii- Legio VIIII Hispana
Posts: 300
Threads: 14
Joined: Sep 2006
Reputation:
0
I have the Find-It hamata. The screws only went through one layer for me; i.e. two on the doubler and one on the hamata chest-area. The problem with the screws is that they come undone VERY easily--I nearly lost my hooks because of them during a parade, so be very careful if using them.
Posts: 667
Threads: 22
Joined: Aug 2006
Reputation:
0
I have this hamata. The screws/buttons do not go through two layers completely, but enough to do the job. I have to check them periodically though while wearing the hamata.
M. CVRIVS ALEXANDER
(Alexander Kyrychenko)
LEG XI CPF
quando omni flunkus, mortati
Posts: 1,337
Threads: 175
Joined: Apr 2005
Reputation:
0
When I had a hamata from Find-It, I used two sets of channel locks to tighten them, and had no problems there after.
"...quemadmodum gladius neminem occidit, occidentis telum est."
a.k.a. Paul M.
Posts: 850
Threads: 104
Joined: Apr 2005
Reputation:
0
hey speaking of which, paul did you find my buttons?
Tiberius Claudius Lupus
Chuck Russell
Keyser,WV, USA
[url:em57ti3w]http://home.armourarchive.org/members/flonzy/Roman/index.htm[/url]
Posts: 132
Threads: 5
Joined: Jun 2007
Reputation:
0
Paul, what is a "channel lock"? apologies for my ignorance... :oops: :oops:
Israel M. Sánchez
Mulae Marii- Legio VIIII Hispana
Posts: 1,337
Threads: 175
Joined: Apr 2005
Reputation:
0
Israel,
No need to apologize.
Here is a photo of Channel Lock pliers
http://www.ted-kyte.com/3D/Pictures/Pli ... 20Lock.jpg
"...quemadmodum gladius neminem occidit, occidentis telum est."
a.k.a. Paul M.
Posts: 655
Threads: 67
Joined: Sep 2005
Reputation:
0
A quick fix method I am using until I get my new hook and button set made by Matt Lukes was to go to the local hardware store "Home Depot" and purchase a set of 4 1/4 inch flat washer and 4 Number 10 fine screws at 3/4 inch in length.
The shaft of the screw fits though the mail rings and allows the button to be screw in, and tightly.
Not exactly period, but it works and is invisible to the public eye. Total cost in four washers and four screws was like 1.25 USD.
A different method in case you dont have channel locks.
Hope this is helpful,
Mike
Mike Daniels
a.k.a
Titus Minicius Parthicus
Legio VI FFC.
If not me...who?
If not now...when?
:wink: <img src="{SMILIES_PATH}/icon_wink.gif" alt=":wink:" title="Wink" />:wink:
Posts: 132
Threads: 5
Joined: Jun 2007
Reputation:
0
Yeah, it is a very good idea, at least for the time until the new hook and buttons arrive
D . The final configuration will be i think that one proposed by Marcus/Peroni.
Israel M. Sánchez
Mulae Marii- Legio VIIII Hispana
Posts: 655
Threads: 67
Joined: Sep 2005
Reputation:
0
Yep, agreed.
I have the all leather backing and edging now just need the hook and button set
Cheers!!
Mike
Mike Daniels
a.k.a
Titus Minicius Parthicus
Legio VI FFC.
If not me...who?
If not now...when?
:wink: <img src="{SMILIES_PATH}/icon_wink.gif" alt=":wink:" title="Wink" />:wink: